East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Mass.
> Mini quick fist tool holder clamp fire / rescue truck
Mini quick fist tool holder clamp fire / rescue truck
* Holds objects from 1/2" to 1" (13 to 25mm) in diameter.
* Mounts easily with a single bolt or screw or use Industrial Adhesive.
* Use on Military, law enforcement, fire, ATV's, RV's, farm and 4x4 vehicles.
* Works great to mount fishing poles, wire bundles, small flashlights and hand tools. Can also used as a pipe standoff (maximum sustained heat of 180 degrees F.)
* Each clamp supports a safe working load of 13lbs (6 kilos); or 7.5lbs (3.4 kilos) with the Industrial Adhesive.
* Industrial Adhesive included with purchase of 12 or more.
US and Worldwide Patents Pending
QUICK FIST Clamps are made in the USA of heavy duty transportation grade rubber and are not affected by hot or cold climates or salt. The rubber is also UV resistant.
1. Use either #6 flathead screw or bolt (Do Not Over tighten); or use E-6000 Industrial Adhesive. With the temperature between 50 to 90 degrees F (10 to 32 degrees C), apply a smooth, light coat of adhesive on both the clamp and on the mounting surface. Wait 10 minutes. Then mount the clamp by pressing it firmly against the mounting surface. Wait 24 hrs for complete curring before use.
2. The MINI QUICK FIST can be mounted with the strap facing in any direction.
3. To clamp: Put the tool or implement into the jaws and push the strap to its desired tightness.
4. The MINI QUICK FIST clamps are great as pipe stand-offs, but do not use on pipes whose temperature consistently exceeds 180 degrees F (or 82 degrees C).
