East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Connecticut
> Services
> Replacement Parts
> Vernon burr-bit ,4MM, 2 flute deburring tool part 30400
Vernon burr-bit ,4MM, 2 flute deburring tool part 30400
You use these in conjunction with a tap which is sold seperatly. The taps do not come with the Burr-Bits!!
These Burr-Bits usually sell for over $30.00ea. Don't miss out on this great deal!!
Details on the Burr-Bits are below:
• Deburrs the top of the tapped hole as the tap is being withdrawn from the workpiece.
• Eliminates expensive secondary deburring.
• Cuts only during tap withdrawal for a smooth clean chamfer.
• Improves part quality, no tapped hole goes unfinished.
• Repeatable results while tapping thousands of holes!
• Re-sharpen on any radial relief grinding fixture.
• We maintain a large stock in both SAE and Metric sizes for 2, 3 and 4 flute taps.
• Long-life HSS cutter heads are stocked in your choice of 120º or 90º included angles.
• Special cutter angles between 82º and spot facing are available.
• Burr-bits are available for forming taps, pipe taps, heilicoil taps, acme taps,
Whitworth taps, European ISO and Japanese JIS taps.
