East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > DC
> Machinery
> Commercial
> Tarnow 22" x 80" lathe, 3 1/2" hole, loaded, excellent
Tarnow 22" x 80" lathe, 3 1/2" hole, loaded, excellent
SWING IN REMOVABLE GAP: 31-1/2"
SPINDLE SPEED RANGE: 20 TO 1600 RPM
CARRIAGE LENGTH, BEARING ON WAYS: 22"
RANGE OF LONGITUDINAL FEEDS (98): .0007 - .72 IPR
RANGE OF CROSS FEEDS (98): .0004 - .36 IPR
INCH THREADS (70): 1/4 - 56 TPI
TAILSTOCK LENGTH, BEARING ON WAYS: 12 3/4"
QUILL TAPER - AMERICAN STANDARD: MT 5
SET OVER FOR TAPER TURNING: +/- 1/2"
MOTOR: 15 HP, 3 PHASE, 220/440V, 60 HZ.
2-WAY RAPID TRAVERSE = MORE PRODUCTIVE OPERATOR WITH LESS FATIGUE
WIDE RANGE OF THREADING AVAILABLE (49 FEEDS, 35 INCH AND 24 METRIC THREADS WITHOUR END GEAR CHANGE)
NON-OBSTRUCTING “KICK-OUT†LONGITUDINAL CARRIAGE STOP WITH FINE ADJUSTMENT
AUTOMATIC LUBRICATION TO HEAD-STOCK FEEDBOX AND APRON
SEMI-AUTOMATIC LUBRICATION TO BEDWAYS AND CROSS SCREW
SIMPLIFIED OPERATOR CONTROLS AND GRAPHICS
“GAMET†PRECISION BEARING OFFERING THREE-BEARING SPINDLE SUPPORT FOR HEAVIER CUTS
FULLY CLUTCHED HEADSTOCK (WITH SEPARATE ELECTROMAGNETIC CLUTCHES FOR FORWARD, REVERSE AND BRAKE)
FULL LENGTH CROSS SLIDE (25†LONG) FOR MORE PRECISE “X†AXIS MOVEMENT WITH DUAL T-SLOTS FOR REAR FIXTURING
ENCLOSED FEEDBOX WITH ALL SHAFTS SUPPORTED IN ANTI-FRICTION BEARINGS
HEAVY DUTY TAILSTOCK WITH 3†DIAMETER QUILL WITH TANG AND GRADUATED COLLAR ON TAILSTOCK SCREW FOR ACCURATE DEPTH READING
TAILSTOCK SCREW MOUNTED IN THRUST BEARINGS FOR RIGIDITY WHEN DRILLING
FULL LENGTH REAR METAL SPLASH GUARD WITH FRONT PULL OUT CHIP PAN FOR EASIER CHIP DISPOSAL
HEAVY DUTY CROSS RIBBED BED WITH WIDE FRONT V-WAY
THREE LEG SUPPORT OF BED FOR 80†BETWEEN CENTERS
CLEANED, CHECKED AND IN GOOD CONDITION!!!
Member: Machinery Dealers National Associationrule
Hours of Operation: Monday - Thursday 9 a.m. to 5 p.m. - Friday - 9 a.m. to 4 p.m.
1311 South Ponca Street - Baltimore, Maryland 21224
Phone (***)-633-2300 or (***)-394-4399 - Fax (***)-633-7737
