East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Mass.
> Production
> Procon pump transfer pump ,soda pump, cutting oil pump
Procon pump transfer pump ,soda pump, cutting oil pump
PROCON PUMP, PAPER TAG ATTACHES SAYS 51A21931
FLANGE HAS 2-1/8" PILOT, FLANGE IS PRESSED ON AND CAN BE REMOVED IN AN ARBOR PRESS, PUMP BODY AT SHAFT MEASURES1-1/2". I HAVE PRESSED OFF FLANGE AND ATTACHED THIS PUMP TO ELECTRIC MOTORS USING A 1-1/2" HOSE AS AN ADAPTER.
BUILT IN ADJUSTABLE PRESSURE RELIEF VALVE , - 3/8" NPT PORTS IN AND OUT. LEFT HAND ROTATION., WILL WORK RIGHT HAND ROTATION , BUT THE RELIEF VALVE WILL BE INEFFECTIVE.
BRASS BODY, VANE PUMP . I BELIEVE INSIDE HAS CERAMIC PARTS, SHAFT IS NOT MAGNETIC SO I ASSUME IT IS STAINLESS STEEL.
I USE THIS PUMP TO PUMP CUTTING FLUID ON A LARGE RADIAL DRILL PRESS ONE PUMP HAS LASTED 15 YEARS .
