East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup   >   New Jersey   >   Production   >   Welding and Gluing   >   Welding rod and aluminum repair rods 100 rod 4 lbs.

Welding rod and aluminum repair rods 100 rod 4 lbs.


1 PACK OF 100 FLUXLESS ALUMINUM REPAIR ROD.
SATISFACTION GUARANTEED OR YOUR PURCHASE PRICE WILL BE CORDIALLY REFUNDED UPON RETURN OF MERCHANDISE.
In the early fifties, I started fooling around with trying to weld aluminum with a torch. I had no idea how hard it was, til I tried.
I burned up a lot of aluminum.
I finally learned how to repair aluminum with a torch, with great difficulty and I sometimes burned my aluminum up even when I thought I knew what I was doing.
No more burning up your aluminum.
We have developed a rod that makes it so easy to repair aluminum with any kind of torch, that even an amateur can look good even on the very first try.
This newly developed rod repairs cast aluminum, die cast, extruded, sheet aluminum, pot metal. Aluminum from Japan, Russia, England, France, Fiji Islands, United States or where ever.
This rod repairs aluminum that was made yesterday, or aluminum that was made in the year l888. It is non-discriminatory.
It is compatible with all aluminum alloy.
This new rod will repair any metal that a magnet will not attract.
It is actually true, you can be a success on the very first try.
We have developed a rod that makes it easy for even the first timer to be a success.
A propane torch puts out 2600 degrees farenheit. Aluminum melts at 1200 degrees farenheit.
A propane torch puts out over twice the heat needed to melt aluminum.
So, we have never had a problem with having enough heat.
We used to have a rod problem. Now we have solved the rod problem.
Just clean your aluminum down to bare metal. Use a file, grinder, sand paper, sandblast or brush it off. Just do not use any chemicals.
Heat the aluminum. Use your rod for a test stick. When your rod starts to melt, you know you have the aluminum workpiece hot enough to repair.
I will guarantee you that you will not burn your aluminum. You will be a success on your very first try.
We have developed many rod over the years. We have built thousands and thousands of rods in Arkansas, Florida and Texas.
Promotion and sales are taking up all of my time now, so we are having friends build it for us, but it is to specification.
Our rod has the same satisfaction guarantee that we have always had.
You may have seen me demonstrate this rod.
I have demonstrated this rod over much of the United States in the last several years.
You may have seen me at boat shows, car shows, RV shows, antique car shows, tractor shows, and steam shows, in many different states.
I also distribute my rod out to other demonstrators, and you will see some of them out at various shows over the country.
I have 100's of written testimonials as to the success inexperienced people have had with this aluminum repair rod.
T.D.B. says "Repaired boat prop easily in minutes."
I do business with many boat dealers and one of the boat dealers employee said he repaired a junk boat with my Special Alloy Rod and here is what he said - " I had a Monark. Filled it up with water and found 32 holes. I use the rods to weld up my holes and now I have not 1 leak."
Bert S. says "Patched a crack in lawn mower crank case - It works!"
Steve B. says "I have used this rod to repair racing heads on dirt track cars and this is absolutely amazing how easy and well it works."
One gentlemen says "Repaired barrel sleeve on Beretta 22 target pistol with aluminum repair rod."
Aluminum Repair Rod will even repair "pot metal."
Many welders will tell you that it is impossible to repair pot metal.
Mr. E. R. says "I welded a 55 T Bird horn ring. Have showed car may times with no problem."
THE ABOVE HORN RING WAS MADE OF POT METAL.
The jeep door hinge you see in the below picture is pot metal.
The wind blew the door open and the hinge broke completely off.
I welded it with ease with my Special Alloy Rod and it is one piece of metal now. The hinge is now stronger than it was when it came from the factory.
The electrical conduit fittings you see below are some of the sorriest pot metal ever made. I took two new ones, cut the ends off and welded them together. They are one piece of metal now.
I repaired a compressor head with my SPECIAL ALLOY ROD.
The threads were stripped out.
The compressor was completely useless and a new head was not available.
The compressor does not leak and it has been going for over 2 years after the repair. Picture of compressor below.
I repaired a tripod with this rod. PICTURES BELOW. This tripod is actually welded. It is not just stuck together. It is all one piece of metal now.
I repaired a hole in my jon-boat. Picture below. Easy repair. Neat job. Almost as easy as eating chocolate pie.
The top of the tripod that I welded on is pot metal and it is stronger now than when new.
The boat motor skeg that you see in the picture below was repaired with my SPECIAL ALLOY ROD. Almost everyone that has ever owned a boat motor has had this problem. I have, at times drug my boat up the concrete boat ramp with the outdrive down. Sure hurts the skeg. I don't believe that I have ever drug it down the highway like some have. Some of the welders want $100 to do a repair like this. You can do it yourself for $2 or $3 and a little time.
Mr. W.H. says "I repaired 1976 Harley motorcycle. Outside case cover had a crack and hole. Filled the crack and hole, then polished. Works perfectly."
Mr. K.F. says "I used aluminum repair rod to repair leaking rivets on an old jon boat and it worked well."
Mr. CAP in Corpus Christi, Tx says "I repaired broken tip of outboard aluminum propeller with aluminum rod and was as hard as original.
You can repair boats, jon boat, canoes, lawnmowers, motorcycles, air conditioning equipment, refrigeration units, drill motors, routers, saws, blocks, heads, oil pans, valve covers, chainsaws, weedeaters, four wheelers, all kinds of air tools and the list goes on and on.
I sell aluminum repair rod to welders, auto mechanics, motorcycle mechanics, boat repairmen, outboard motor repairmen, radiator repairmen air conditioning repairmen and lawnmower mechanics all year long, many times for $49.95 for a pack of 25 rod. About $2 per rod.
aluminum repair rod. Approximately 4 pounds
Each rod is 18" X 1/8". We do not cut our rod into short 9" lengths.
This is new fresh rod, and the rod will never go bad. There is no flux in or on it, so there is nothing to go bad.
Please do not use any kind of flux, No chemicals. No acid, no jells, no resin of any kind.
Just file, sand, grind, or sandblast down to bare metal and you are ready to start. No need to have to use a stainless steel brush.
The pictures are showing 1 pack of rod in a bulk box of rod. The box of rod has 1200 rod in it.
Full, easy to understand instructions come with each pack.
Texas residents pay 8 1/4% state sales tax.
Helpfull tech info along with Great! AAA+ service ! The way all biz should run !
Product was just as described. Excellent Communication. Fast service. A++++
http:// /watch?v=s2ctnDWZBIU To watch video, please click on above link.



Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs. Welding rod and aluminum repair rods 100 rod 4 lbs.