East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > North Carolina
> Machinery
> Industrial
> Miller spectrum 375 plasma 115/230 v, 3/8" cutting cap.
Miller spectrum 375 plasma 115/230 v, 3/8" cutting cap.
Miller Spectrum 375 Plasma Cutter 115/230 V
The plasma arc is created by pulling an electrical arc between an electrode and tip. This process eliminates high frequency by forcing an electrical arc between the two pieces.
LVCâ„¢ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power ± 10%.
Protection to extend the life of consumables and the welding torch is enhanced by our post flow circuit that provides shielding gas after you release the trigger.
Electronic Pilot Arc Controller automatically controls the pilot circuit to provide expanded metal cutting ability without having to re-trigger the torch, increasing productivity and extending tip life.
Dual input voltage allow either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position.
LVCâ„¢ line voltage compensation provides peak performance power under variable conditions (98 to 132 volts) for steady cuts and cleaner ending cuts.
Power factor correction expands operator's work area via extension cords while minimizing nuisance trips caused by voltage drops.
LED indicators for pressure, power, cup and temperature allow faster troubleshooting.
Starts without high-frequency so it will not interfere with or damage controls or computers.
* 1/16 in Stand off Cutting...Drag Cutting
* Rated: 3/8 in (10mm)... 5/16 in (8mm)
* Quality: 1/2 in (13mm) ... 3/8 in (10mm)
* Sever: 5/8 in (16mm)... 1/2 in (13mm)
* 27 A at 90 VDC, 35% Duty Cycle
* 4.5 CFM (129 L/min) at 60 PSI (414 kPa)
* with torch: 55 lb (25 kg))
* ICE-27C hand-held torch with 20 ft (6.1 m) cable.
* Heavy-duty work clamp with 20 ft (6.1 m) cable
* 10 ft(3 m) power cord with 115 VAC, 20 A plug
* Extra consumables (3 electrodes, 3 tips, and 1 air fitting)
* Built-in gas/air filter and regulator with extra protection
* Money Orders & Cashier Checks may be sent to:
* Orders generally take 5-6 Business Days to reach you.
If your package arrives damaged, please contact us to arrange the best way to handle your return.
Due to safety requirements involved with much of the equipment we carry, product returns of used equipment is handled on a case-by-case basis.
