East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Pensylvania
> Production
> Welding and Gluing
> 1PC drill endmill reamer extension holder 1/2" x 3/4"
1PC drill endmill reamer extension holder 1/2" x 3/4"
Heavy Duty Tool Holder Extension for 1/2" shank Cutting Tools
* Made out of a heavy steel
* Will Hold cutting tools with a 1/2" round shank
* Inside diameter is .500 +.001 - .000 by 2.875 deep
* Shank size is 3/4" x 1-7/16 length
* Tools are secured by 1 cup point socket head set screw
* There is no workholding marks or indications of wear
* There is marks where the length of the shank has been reduced
* The O.D. of the tool does have very light grind marks
* I put a endmill in it and it was a very tight fit. I had to lubricate the shank.
* Over all length of this holder is 3-5/8"
* Major body diameter is .812
* Manufacturer is unknown. It is not a cheap import tool
* Stock location: e-Bay isle-box 1-6
In our e-Bay store is an increasing variety of products from some of the most respected manufacturers in the metal cutting industry. These products are priced often well below market price. Please come in and look around. My Stores Logo
We appreciate you stopping by and hope that you will come back and visit us again.
