East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Pensylvania
> Production
> Welding and Gluing
> L607 dual depth proline moisture meter
L607 dual depth proline moisture meter
L607 Dual Depth Proline Recommended For: Flooring Installers Anyone Applying Waterborne Finishes Anyone who requires accurate measurements on finely sanded wood products Materials to Measure Finely sanded wood Anytime you want 1/2†depth penetration Same materials as others, as long as the wood is finely sanded Specific Applications This meter has “the smarts†to measure 1/2†depth penetration or just surface moisture. This analog meter is specifically designed for those applying waterborne finishes. The meter will measure the MC of the wood before applying the first coat, and then measure the wood after the coat has been applied to monitor the curing process. This meter takes the guesswork out of knowing when to apply the next coat of finish. This analog meter is non-adjustable for specific gravity. However by using the adjustment table included in the handbook, one can determine the MC of any wood measured. If there is surface moisture, it will read the surface moisture only versus an average to a depth of 1/2â€. Check the wood before applying the first coat. After applying a coat of finish, check and continue checking until you get the same reading before applying the next finish. By getting the same reading, you know it's safe to apply the next coat. This is NOT designed for use on rough lumber. Meter Specifications Size & Weight Length - 4 9/16â€; Width – 2 3/4â€; Height - 1 9/16†; Weight - . 39 lbs Power Power – 9 volt battery Auto Power Shut Down – 60 seconds Depth of Measurement 1/2†on dry sanded surface Surface moisture only on wet surfaces Moisture Content 5% - 30% Analog Display Scanning Area 1 1/2†x 2 1/2†Specific Gravity Preprogrammed to SG of Douglas Fir which is .50 Standard Range of .30 - .70 Can determine readings for other species by referring to the species tables in the manual Calibration Verifiable with Calibration Block (sold separately) Other Requires Adjustment Table Comes with Ballistic Case with belt loop 1 year warranty Battery Included Reference Library CD included with meter Meter Specifications Size & Weight Length - 4 9/16â€; Width – 2 3/4â€; Height - 1 9/16†; Weight - . 39 lbs Power Power – 9 volt battery Auto Power Shut Down – 60 seconds Depth of Measurement 1/2†on dry sanded surface Surface moisture only on wet surfaces Moisture Content 5% - 30% Analog Display Scanning Area 1 1/2†x 2 1/2†Specific Gravity Preprogrammed to SG of Douglas Fir which is .50 Standard Range of .30 - .70 Can determine readings for other species by referring to the species tables in the manual Calibration Verifiable with Calibration Block (sold separately) Other Requires Adjustment Table Comes with Ballistic Case with belt loop 1 year warranty Battery Included Reference Library CD included with meter
