East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup   >   Pensylvania   >   RFQ   >   40 taper tool presetter BT40 or CAT40 for cnc mills

40 taper tool presetter BT40 or CAT40 for cnc mills


Takes less than 30 seconds to get a height and diameter reading!!
Set up your boring bar to size without even taking a test cut.
Unit takes all 40 taper tools without any changes, BT40 CAT40 or ISO40.
Preloaded linear guides for height and diameter gives you smooth and repeatable readings
Unit is made for machine-shop environment all linear scales have covers to protect from chips and dirt.
Base sits on 3 adjustable rubber feet for best balance.
Powder coated finish is made to look like new for years.
This unit can measure diameters from 0.0 to 12.5 inches and height up to 13 inches.
resolution .0002". Repeatability .0001" on both x and y axis.
Runs on normal 110v. Standard plug. Switch in back allows 220v operation.
40 taper standard is included. It is precision ground to 40mm diameter and 200mm gage length within 1 micron.
Display is 10" X 6" for easy reading. Position is adjustable.



40 taper tool presetter BT40 or CAT40 for cnc mills 40 taper tool presetter BT40 or CAT40 for cnc mills 40 taper tool presetter BT40 or CAT40 for cnc mills 40 taper tool presetter BT40 or CAT40 for cnc mills 40 taper tool presetter BT40 or CAT40 for cnc mills 40 taper tool presetter BT40 or CAT40 for cnc mills 40 taper tool presetter BT40 or CAT40 for cnc mills