East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > North Carolina
> Machinery
> Repair kit: (flat wire) for 8" impulse sealer
Repair kit: (flat wire) for 8" impulse sealer
Repair Kit: (Flat Wire) for 8" Impulse Sealer
Repair Kit: Teflon Cover & Flat Wire Element for 8" Impulse Sealer
WHEN LOOKING AT OTHER KITS MAKE SURE YOU ARE GETTING ALL THE PARTS NECESSARY FOR A PROPER JOB, YOU SHOULD HAVE THE FOLLOWING
* 1 REPLACEMENT Element (wire)
* 1 Teflon Fabric 5 mil cover that goes over the element 1.125" wide
* 1 Piece of 1/2 inch teflon tape(adhesive) 10 mil that goes under the element.
Failure to replace the teflon tape that insulates the element from the body of the sealer will cause premature failure of the element and may cause failure of the timing circuit or transformer.
This Kit will fit most all 8" sealers TEW TISH FS
