East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Ohio
> Production
> Food Processing
> NSF Approved Food and Electrical
> Delta 36-716B 10" hybrid table saw w/ 30" unifence
Delta 36-716B 10" hybrid table saw w/ 30" unifence
You can shop for your needs 24 hours a day, 7 days a week.
This is the Brand New in the Box w/ 2 year warranty
10" Hybrid Saw w/30" DELTA® UNIFENCE®, Rail and Table Board
The 36-716B includes 1-3/4 HP, 120 Volts (240V capable) motor, deluxe see-thru blade guard with splitter and anti-kickback fingers, heavy-duty rip fence, miter gauge, 10" saw blade, table insert, arbor pulley, poly v-belt, cabinet, rail, 30" DELTA® UNIFENCE®,, laminated table board, instruction manual, 36-946 Heavey Duty Precision Miter Gauge.
* Left tilting blade tilts away from fence.
* Side table board included.
* 45° and 90° bevel stops adjustable from the table top; deluxe miter gauge.
* Oversized on/off switch with full overload protection
* Motor: 1-3/4 HP, 120V, 60 hz (240V capable)
* Blade Diameter: 10" (254 mm)
* Max Rip To Right Of Blade: 30" (762); 50" (1270 mm)
* Max Rip To Left Of Blade: 13-1/2" (343 mm)
* Depth Of Cut At 45 Degrees: 2-1/8" (54 mm)
* Depth Of Cut At 90 Degrees: 3-1/8" (79 mm)
* Distance, front of table to center of blade: 17-1/2" (444 mm)
* Table in Front of Saw at Max. Depth of Cut: 12-1/8" (308 mm)
* Max Width Of Dado: 13/16" (21 mm)
* Miter Gauge Groove: T-Slot
* Table Height: 33-3/4" (857 mm)
* Table Size: With extension wing & table board: 54" x 27" (1372 x 686 mm)
* Chip Exhaust Opening: 4" (101 mm)
Now available business leases as little as $1000.00 Lease Application
* Most orders are processed the same day but may take up to 1 extra business day to be processed to ensure your item meets quality assurance.
* We use Freight Truck Ground service to a business address or residential address.
* The freight companies are also subject to a number of regulations one being that they are not to give any assistance in unloading from the truck, they are only responsible to get the products to the back of the truck. Lift-gate service may be available if the freight company we use offer it but there will be a extra charge of $75.00.
* Tracking numbers will be sent if requested in checkout notes. We are not responsible if your email account rejects any email from us as some email is sent in bulk and may be treated as spam.
* Any problems with hardware beyond our 7 business day return policy must be taken up with the manufacturer and/or carrier/network operator. The contact information to most manufacturers and carriers/network operators is listed in our Manufacturer Info section located below.
