East Coast Part Supplier and Warehouse Association Moderated Interchange Newsgroup > Ohio
> Production
> Metalworking
> New fluke 63 infrared thermometer in factory box
New fluke 63 infrared thermometer in factory box
Non-contact temperature measurement
Reach for a rugged Fluke 60 series IR thermometer for jobs requiring temperature measurement in hard-to-reach, hot, rotating, or dangerous situations Get accurate readings over a broad range of temperatures to 535°C (999°F). Plus, the enhanced optics allow you to measure smaller objects further away. All with a comfortable and easy to use handheld device.
* High accuracy: 1% and repeatability: 0.5%
* Expanded measurement range up to 535°C (999°F)
Backlit display for use in dimly lit areas
Enhanced optics to measure smaller objects from farther away
Adjustable emissivity setting for more accurate measurements
Laser sighting: Single point, offset
Accuracy: ±2°C (±3°F) for targets between -18°C (0°F) to 23°C (73°F); ±1% of reading or ±1°C (±2°F) whichever is greater, for targets 23°(73°F) to 510°C (950°F) Above 510°C: 1.5% of reading
The professional’s diagnostic tool
The Fluke 63 non-contact thermometer is the ideal professional
diagnostic tool for quick and accurate temperature measurements.
This handheld portable tool enables professionals to
research heating and ventilation problems, monitor the status
of electrical motors and electrical panels and diagnose car
Expanded measurement range up to 535 °C (999 °F)
High accuracy: 1 % and repeatability: 0.5 %
The Fluke 63 thermometer makes troubleshooting quick
and easy. The single dot laser sighting system guides measurements
to the right target and in less than a second, the large
temperature display provides current and MAX surface temperatures.
The locking trigger and tripod mount capability allow
for continuous temperature monitoring.
The single dot laser sighting system guides measurements to
the right target and indicates the approximate center of the
Use the Fluke 63 within six feet of the intended target. At greater
distances, the measured area will be larger (approximately the distance
divided by 12). The Fluke 63 offset single-point laser indicates the
approximate center of the measurement area.
Temperature range -32 to 535 °C (-25 to 999 °F)
Accuracy -32 to -26 °C (-25 to -15 °F): ±3 °C (±5 °F)
(Assumes ambient -26 to -18 °C (-15 to 0 °F): ±2.5 °C (±4 °F)
operating temperature -18 to 23 °C (0 to 73 °F): ±2 °C (±3 °F)
of 23 °C [73 °F]) 23 to 510 °C (73 to 950 °F): ±1 % of reading
or ±1 °C (±2 °F), whichever is greater
Above 510 °C (950 °F): ±1.5 % of reading
² ±1 °C (±2 °F), whichever is greater
² 0.5 second (95 % of reading)
Ambient operating temp 0 to 50 °C (32 to 120 °F)
Storage temperature -20 to 60 °C (-13 to 158 °F) without battery
Dimensions 200 x 160 x 55 mm (8 x 6 x 2 in.)
Power 9 V alkaline or NiCd battery
Batter life (alkaline) 10 hours with laser and backlight on
40 hours with laser and backlight off
Typical distance to target Up to 2 m (6 ft.)
Temperature display °C or °F selectable
Display resolution 0.2 °C (0.5 °F)
